Swashplate and Bent axis hydraulic motors

Standard hydraulic motors at low speeds in their starting phase cannot generate the necessary torque. Therefore, the power of the fast spinning hydraulic motors has to be reduced by means of several step gearboxes down to the speed needed on the wheel. Somewhat higher windage losses and poorer mechanical efficiency are benevolently accepted in this context. Quite the opposite holds true for the motors by Linde Hydraulics: The motors of the Series 02 are capable of transmitting the required torque even at low speed and make it possible to start smoothly and sensitively.

HMV-02 High pressure variable displacement motor for open and closed circuit operation with displacement from 55 to 280 cc. more Variable displacement motor HMV-02

HMV-02 PTO High pressure trough-drive variable displacement motor for open and closed circuit operation with displacement from 105 -165D cc. more Trough-drive variable displacement motor HMV-02 PTO

HMF-02/HMA-02 High pressure fixed displacement motor open and closed circuits with displacement from 35 to 135 cc. more Fixed displacement motor HMF-02/HMA-02

Multiple Units High pressure double, tandem and multiple units for open and closed circuit operation with displacement from 55 to 280 cc per unit. more Double, tandem and multiple pumps/motors Multiple Units

CMV High pressure variable displacement bent axis motors for closed and open circuits with displacement from 60 to 215 cc. more Variable displacement motor CMV

CMF High pressure fixed displacement bent axis motor for open and closed circuits with displacement 80 cc. more Fixed displacement motor CMF